NOTE! You may also need to open the MSN Game Zone and DX ports QuickTime 4 Client & RealAudio on Port 554Īsheron's Call NOTE: I needed to set these ports to dial out.Īlso enable on ViaVideo (under H.323 QoS) 'Use Fixed Ports' 3230-3235 TCP & UDP To make PC-TO-PHONE calls, it seems only UDP port 9900 must be opened (the fewer ports open, the better!). I found that port range 9900-9901 UDP is also needed but not mentioned at phonefree support.Īlso shut off any other firewall programs you may have running. ** According to phonefree the ports you need open are: This Mapping is needed to hear the audio from the incoming party, outgoing audio would work without it. Outbound ports are usually not an issue but are listed here for network users who may need to manually configure for a proxy or NAT server or other hardware device. They are dynamically assigned if you leave the lower two boxes set to 0's on the 'paltalk port settings' tab. Most users never have to set these lower two ports.
The last 2 UDP outbound ports are usually set in pairs. Ports must be mapped in your firewall, then set in the Net2Phone client One additional UDP and one TCP port in the range of 1 to 30000 NOTE: Shut off any personal firewall programs such as BlackIce, ZoneAlarm, etc.Īllows Voice, PC to Phone, Messages, and Full File transfer capabilities. Click "Use the following TCP listen ports for incoming event" and set the TCP ports for 20000 to 20019 for the first user, 20020 to 20039 for the second user, 20040 to 20059 for the third user, etc. Then select "I don't have a SOCKS Proxy server on my firewall" or "I am using another Proxy server". In ICQ under "Preferences & security", "Preferences" and Connections, click on "I am behind a firewall or proxy" then click on "Firewall Settings". Server on a tracker (the data stream is only outgoing so if you want toĭisable in bound on a firewall it would work fine) The UDP port enabled 5499 is required only if you want to list your It (so if you choose 4000 then you must enable 4000 - 4003) If you change the default port, then you must enable the 3 ports after The TCP Ports enabled are 5500 - 5503 (This is for the standard 5500 IN TCP 12053 ĭue to NetMeeting assigning ports dynamically.)
0 kommentar(er)
